Shoemaker Manufacturing - Manufacturing Quality Grilles, Registers and Diffusers Since 1947

Please be advised that our website will be temporarily shut down for integration purposes.
Quotes & Portal Orders will be suspended starting October 30, 2024.
As of November 4, our new and refreshed website will be at www.rectorseal.com!

RectorSeal

Made with Pride in the Great Northwest

Quality Grilles, Registers and Diffusers Since 1947

Contact us

Make a List

Make a Schedule

SHOEMAKER PORTAL

Feedback

3550 - Vertical Mount Backdraft Damper

Standard Features

Dampers are opened by air pressure differential and closed by gravity
16 gauge channel frame
Galvanized blades are 26 gauge and vee stiffened for extra strength and stability
Out of airstream linkage
Single blades on dampers with a height of 10" or less
Blades run parallel to first dimension given
Square steel pivot pins in nylon bushings
Foam tape sealed blade edges to dampen noise
Adjustable counter balance arms mounted to center of blades. Adjustable weights can be positioned along arm for various opening pressures. (Available only on dampers with multiple blades.)
Minimum size 6"x6"
Maximum size 48"x48"
Fractional and exact sizes available
Galvanized Finish

Shoemaker Customers:
Login now to configure this product and add it to a
quote or order!

Don't have an account? * Get one now
* You must be a Shoemaker Customer to get an account.

Compare

Finishes

Options (must specify when ordering)

Submittals (Technical Data/Revit)

Cross Reference

Galvanized

Options

Double blades on dampers with a height of 8" or 10" (i.e. 3550-8x8 DB)
Outside mounting flange
Bronze bearings
Sleeves (contact factory for details)
Fractional and exact O.D. dimensions

Compare Similar Products -

Comparing Products

3550 - Vertical Mount Backdraft Damper

3550 VERTICAL MOUNT BACKDRAFT DAMPER

Sidewall

Standard

Vertical

5"

5"

Parallel to 1st dimension

26 gauge galvanized steel

Adjustable

16 gauge steel

Intake or Exhaust

Galvanized

Damper-Louver

3560 - Horizontal Mount Backdraft Damper (air up)

3560 HORIZONTAL MOUNT BACKDRAFT DAMPER (AIR UP)

Ceiling

Option

Horizontal (air up)

5"

5"

Parallel to 1st dimension

26 gauge galvanized steel

Adjustable

16 gauge steel

Intake or Exhaust

Galvanized

Damper-Louver

3570 - Horizontal Mount Backdraft Damper (air down)

3570 HORIZONTAL MOUNT BACKDRAFT DAMPER (AIR DOWN)

Ceiling

Option

Horizontal (air down)

5"

5"

Parallel to 1st dimension

26 gauge galvanized steel

Adjustable

16 gauge steel

Intake or Exhaust

Galvanized

Damper-Louver

3580 - Round Vertical Backdraft Damper

3580 ROUND VERTICAL BACKDRAFT DAMPER

Ceiling or Sidewall

No

Vertical or Horizontal

Varies by size

Varies by size

N/A

26 gauge galvanized steel

Adjustable

16 gauge steel

Intake or Exhaust

Galvanized

Damper-Louver

SUBMITTALS

3550 Series Submittal

No performance data is available for this product

Cross Reference

Competitor

Product Series

Shoemaker Series Notes

GREENHECK

ES-30

Greenheck ES-30 is made of aluminum. Shoemaker 3550 is made of steel.

RUSKIN

S3G

Ruskin S3G has a 3" depth. Shoemaker 3550 has a 5" depth.

Hide

Disclaimer

CROSS REFERENCE DISCLAIMER

This cross reference tool is intended to assist in determining an equivalent Shoemaker Manufacturing product series based on another manufacturer's product series. Products shown are a close equivalent in their functional use, though not necessarily an exact match. Every effort has been made to ensure the accuracy of this information; however, Shoemaker will assume no responsibility for errors or omissions which may have occurred. Information provided in this cross reference tool is subject to change without notice.